Aqara tasmota. Can anyone tell me what Gateway 100% work...

  • Aqara tasmota. Can anyone tell me what Gateway 100% works with HA, the Aqara switches and the Xiaomi sensors? I can’t find anywhere that says the Aqara switches definitely work the Gen 2 hub Thanks guys I like Aqara products but try to avoid using their hubs (cybersecurity concerns). b1acn01 model (which I purchased Hi everyone, I wanted to share my experience with the new Tasmota integration in Home Assistant 0. After some research, I decided to give it a try, and I’m thrilled with the results! Why Tasmota Hello everyone, I’m diving into the world of MQTT and Tasmota devices, and I wanted to share my journey and some insights with you all. I recently set up a Raspberry Pi 3B with Raspbian and installed openHAB 2. Adding all of the Aqara devices directly to the coordinator worked, keeping the connection in the network for several weeks. However, as I experimented with renaming the channels, I encountered a puzzling issue where the renamed entities wouldn’t reflect in HA despite multiple reboots and We have certified 4 Aqara devices, all of which are the first to use our Works via Matter with Home Assistant badge. Hence it is easier to deploy wherever you want in your home. Let me walk you through how I got everything up and running smoothly! First off, I started with the Shelly 1 for basic on/off control of my appliances. Integrating Tasmota Devices with SmartThings: A Comprehensive Guide General Zigbee ID: lumi. Today, I’d like to share some of my experiences and insights regarding the integration of SmartThings and Tasmota, as well as some tips that might help others on a similar journey. However, I encountered a bit of a hiccup when trying to get my Tasmota sensors to display energy data on my dashboard. Tasmota communicates with Home Assistant using MQTT. And here, set up the Aqara device in pairing mode so you can start the pairing process. I’ve always been intrigued by the idea of controlling my home environment with just a few taps on my phone, and after diving into the world of Tasmota, OpenHAB, and Home Assistant, I’m more excited than ever to share my experiences and tips with the community. (Make sure you use the Edge version of Zigbee2mqtt) I was able to add in all my sonoff and aqura devices without too much trouble. My journey into the world of smart home automation has been nothing short of fascinating. But I was curious to see if switching to the built-in Tasmota integration would offer any benefits or make my setup more streamlined. Initially, everything went smoothly—I set up the device using setoption19 1, and the entities appeared in HA. 0 and I try to connect my Aqara temperature/huminity sensor to in using Zigbee2mqtt. This Blueprint requires the lumi. The Rf bridge has been Tasmotised and I have set them up in Home assistant and homekit. It’s been a great way to monitor my energy consumption in real-time Hello everyone, I’ve been diving into the world of MQTT integration and automation in Home Assistant, and I wanted to share some of my experiences and tips that might help others on their journey. For those who aren’t familiar, Tasmota is a firmware that can be flashed onto ESP8266-based devices, turning them into versatile IoT nodes Learn how to add Aqara T1 and other in wall relays to NodeRED and build an awesome dashboard that comes with power consumption data that works for all relays. I’m able to schedule my devices to turn on and off at specific times, which is perfect for my I'm using Tasmota for my Tuya devices, works really fine! The advantage of the last method would be that this is a universal solution which you can expend like you want, all unified in one application instead of multiple apps and you know what you have (open source). First and foremost, I’ve been thoroughly impressed with the SmartThings app. sensor_magnet. Zigbee2Tasmota (Z2T) is a lightweight Zigbee gateway/bridge solution running on ESP8266/ESP8285 or ESP32 Wi-Fi chips. I’ve been using these devices for a while now, and they’ve been a great addition to my smart home setup. ### Tasmota on Sonoff RF Bridge: A Smooth I recently embarked on a journey to integrate my Sonoff 4Ch Pro with Tasmota firmware into Home Assistant (HA). The sensor is brand new and is found directly and I can give it a new name, but it doesn’t recieves any values. Home Assistant can add Tasmota devices using: Official Tasmota integration - preferred and automatic instant discovery of entities Database of Zigbee devices compatible with ZHA, Tasmota, Zigbee2MQTT, deCONZ, ZiGate and ioBroker New Aqara Motion Sensor P1 (MS-S02) attribute help #18201 Unanswered rebel7580 asked this question in Q&A edited I recently embarked on a journey to integrate my Sonoff devices with Home Assistant using Tasmota firmware, and I must say, the experience has been nothing short of amazing! 🌟 Starting with the basics, I flashed a Sonoff Basic module with Tasmota and configured it for energy monitoring. It seems the firmware needs to be upgrade Aqara cubes (and other Aqara sensors, switches, …) communicate through the Zigbee protocol with a HUB, this is a very efficient protocol for battery powered devices (compared to WiFi) though you need either a HUB or hack your way around one … I decided to do the latter and expand my Raspberry Pi which runs Home Assistant with an Zigbee antenna. The cube shows up with a battery icon and question mark. My Setup I’ve been using a Tasmota SML module with a Hichi IR-WiFi sensor for about a year now. 5. First, I installed Mosquitto Explore a comprehensive database of Zigbee devices compatible with various smart home platforms like ZHA, Tasmota, and Zigbee2MQTT. Unfortunately the new Aqara devices are not working. 💡 However, I’ve noticed that while the meter displays daily and weekly usage on its Database of Zigbee devices compatible with ZHA, Tasmota, Zigbee2MQTT, deCONZ, ZiGate and ioBroker Hello, I need to configure on HA some Aqara vibration sensors connected to a Tasmota zbbridge. It supports four commands - single press, double press, long press, and release. Nov 8, 2025 · I recently decided to enhance my smart home setup by installing Tasmota firmware on my Spider Z RGB LED strip controller. 0. Learn all about getting setup here. Instructions on how to integrate your Zigbee Home Automation (ZHA) devices within Home Assistant. The energy Database of Zigbee devices compatible with ZHA, Tasmota, Zigbee2MQTT, deCONZ, ZiGate and ioBroker I’ve been diving into the world of Tasmota devices lately, and it’s been an exciting journey! 🚀 I recently acquired a few Tasmota-enabled devices, and while most of them are working seamlessly, I’ve encountered a few bumps along the way. The Setup I started with a basic 3-way light switch setup, which I knew could Hi everyone, I wanted to share my recent experiences with Tasmota and see if anyone else has encountered similar issues or has advice to offer. Will I be able to use these sensors with the aqara m2? Even if it's just through HA. I’ve put the ZB Bridge into “Zigbee Permit Join” mode, and pressed the pairing button on the Aqara sensor u… It converts cube events into a JSON format and publishes them via MQTT with the AqaraCube prefix, enabling integration with Tasmota rules or external automation systems. Hi there, i have a problem with using the Aqara E1 double key wireless switch (WXKG17LM) with tasmota. 🌟 MQTT Integration: A Game Changer I recently set up MQTT to control my Tasmota devices, which are on dynamic IPs. Initially, everything seemed to be going Adding the Sonoff Zigbee Bridge Pro with Tasmota to your Home Assistant setup, brings support for a wide range of Zigbee devices. Here’s my journey and some tips for anyone looking to do the same! My Setup I’ve been using Tasmota firmware on my Sonoff Basics devices for a while now, and I wanted to expand their functionality by controlling them with my This Blueprint will let you configure an Xiaomi Aqara Wireless Mini Switch paired to the ZHA integration. The process was a bit daunting at first, but I managed to get it up and running smoothly with Hassio. I need some help, I have the Aqara hub V2 (With the alarm) and several Sonoff door/window sensors. Device Setup and Initial Impressions Setting up my Tasmota I flashed my Sonoff ZBBridge with Tasmota and setup Mosquito and Zigbee2mqtt. 117. I tried to add the aqara hub to home Hey everyone! I wanted to share my recent success with flashing Tasmota on my ME81H thermostat. As a homeowner deeply interested in smart home technology, I’ve always been curious about ways to enhance the functionality and security of my devices without relying on cloud services. I’m seeing that the messages sent on the MQTT topic are like: 21:12:30. I paired the E1 su After hours of troubleshooting, I thought I’d share my journey and maybe help someone else avoid the same frustration. Let me walk thro… Hi everyone! 👋 I just finished setting up my Tasmota device with my ISKRA energy meter using MQTT, and it’s been a fantastic experience so far! 🎉 The real-time data is coming through perfectly, and I’m really excited about the possibilities this opens up for monitoring my energy consumption. It’s been a bit of a journey, but I finally got it working smoothly, and I’d love to walk through my experience in case it helps anyone else out there. I recently migrated from Iobroker to Home Assistant, and I must say, the transition has been quite smooth thanks to Proxmox. I’ve got everything set up and it’s functioning perfectly, but I’m curious about the underlying logic. I tried doing this in the home app but could not. Oct 31, 2024 · I am trying to set up a Zigbee Aqara temp/humidity sensor to Home Assistant (2024. I came across the Tasmota firmware for my Sonoff switch, and it’s been a game-changer. 0-1 to explore MQTT integration. I’m brand new within this field, so there might be a very simple solution to this. I’ve paired the sensor with the Bridge, and the Tasmota console shows temperature and humidity readings: Apr 10, 2023 · I have a new Aqara Motion Sensor, and am trying to add it as a Device to my Sonoff ZB Bridge/Tasmota/MQTT setup. 0! I’ve been using Tasmota switches for a while now, and they’ve been working perfectly with MQTT. Note: Apparently the manufacturer made 3 different revisions of this device over the years, each with slightly different capabilities. Database of Zigbee devices compatible with ZHA, Tasmota, Zigbee2MQTT, deCONZ, ZiGate and ioBroker There are differentAqara Hub M2 gateways available in the market, these is compatible with the hom assistant Aqara Hub M2 gateway gen 1 August of 2020 that hunger was finally sated as the M2 officially launched in … I recently embarked on a journey to liberate myself from the constraints of Tuya by installing Tasmota on all my compatible devices. It enabled me to use my curtain very comfortably and also integrate it into my home automations to realize nice things like "opening the curtains when my alarm goes off in the morning". I reset the tasmota bridge and was able to rediscover the cube, but only the battery level. The setup was straightforward, and the device connected seamlessly to my MQTT broker. I’m using a Sonoff Zigbee Bridge, flashed with Tasmota. I recently set up a few Sonoff Basics and TH16 switches with Tasmota firmware, and while the flashing process went smoothly, integrating them into my Home Assistant setup was a nightmare. After several attempts and button clicking, the devices can be made to pair but do not provide Contact or Sonoff tasmota aqara cube not working I've got an aqara cube that I am trying to get working with a sonoff bridge flashed with tasmota. Initially, I was a bit hesitant because I didn’t want . I have a SONOFF ZB Dongle-P V3. 🌟 One of the most exciting projects I’ve undertaken PROBLEM DESCRIPTION Hello, I am using Tasmota v10. Over the past few months, I’ve noticed that some of Hi guys I’m looking to purchase some items from the Xiaomi ecosystem but there seems to be numerous hubs, names of devices etc. I was with v9. I was happy with the AQARA Curtain motor since I got it. I’ve been using Tasmota for a while now, but I’ve heard ESPHome offers some really cool features that I’d love to take advantage of. Instructions for how to integrate the Xiaomi Gateway (Aqara) within Home Assistant. Then do, Configuration > Integrations > Configure (ZHA) > Devices > Zigbee Coordinator > "ADD DEVICES VIA THIS DEVICE". Late response Aqara H2 Hello. For those who might not be familiar, Tasmota is an open-source firmware that can turn a wide range of devices into smart home gadgets, and it’s been a game-changer for me. Before going any further, make sure MQTT is properly set up in Home Assistant and Tasmota. Recently, I stumbled upon Tasmota firmware, which seemed like the perfect solution for my Shelly devices. I’ve been using Tasmota for a while now, primarily with Merkury 75W RGBW bulbs, and while I love the flexibility and customization it offers, I’ve run into some frustrating stability problems. My goal is to connect my Tasmota-powered smart sockets to openHAB, but I’ve encountered a few hurdles along the way. Two of the sensors are constantly dropping off-line, despite all three being about the same distance from the hub - about 20' or so. remote. I am solving the late response of Aqara H2 switches. I’ve been diving into the world of smart home automation lately, and it’s been an exciting journey! One of the first things I wanted to tackle was setting up automated timed on/off switches for my devices. Here’s what I learned: I started with the embedded MQTT broker in Hass. Just wondering whether it is possible or how to connect their sensors to 3rd party hubs like the Ikea Dirigera Hub or other zigbee hubs. I'm willing to get the aqara m2 zigbee hub but I already have a few zigbee sensors that aren't aqara. PROBLEM DESCRIPTION A clear and concise description of what the problem is. 4. Tasmota easily integrates with many home automation solutions reporting status and sensor data and allowing complete control. My primary setup involves SmartThings, and while I’ve managed to get everything up and running, I’ve encountered some challenges along the way. I know some of you might be struggling with getting non-Tuya firmware to work, so I thought I’d walk through my journey in c… As a passionate smart home enthusiast, I’ve been diving into the world of integrating various devices to create a seamless and efficient ecosystem. My journey began with Tasmota, which has been a game-changer for me in controlling and monitoring my devices. Initially, I was frustrated because Tasmoadmin wasn’t maintained and only After experimenting with various smart home setups, I’ve found the Sonoff RF Bridge to be a game-changer for integrating legacy devices into my Tasmota ecosystem. 115 MQT: tele/tasmota_zbbridge/SENSOR = {“ZbReceive… I’ve been diving into the world of smart lighting lately, and I wanted to share my experience with setting up a Tasmota-enabled smart switch. These platforms have opened up a whole new realm of possibilities for me, especially when it comes to integrating older, non-smart devices into my ecosystem. 10). It says the interview state was successful and I can see the LQI value, I The latest E1 Door and Window Sensors from Aqara do not work with Zigbee2Tasmota v 10. 0(zbbridge) since today. I'm looking for a painful, even pleasurable, experience in setting up my non-aqara zigbee devices. Hey everyone! I wanted to share my recent success in automating the color changes of my Tasmota-controlled LED light strip. Hi All, What er the current experiences with flashing Tasmota in the Sonoff Zigbee ZBBridge and related Zigbee devices (sensors / power switches, etc)? Is this working flawless or is it still in experimental / Beta stage? And after flashing with Tasmota how well do those devices interdace with a HA platform? And how do those compare with (the performance of) the family of Aqara Zigbee sensors? Hello. aq2 - Aqara MCCGQ11LM compatibility with third party gateways Hey everyone! 👋 I’ve been diving into the world of ESPHome lately and thought it would be a great opportunity to migrate some of my Tasmota devices over. io, and while Hey everyone, I wanted to share some of my experiences with integrating Shelly devices using Tasmota firmware. The ability to customize and extend functionality through MQTT has opened up endless possibilities, and I’ve successfully integrated Hey everyone! I’ve been diving into the world of smart home automation lately, and I’m absolutely thrilled with how much I’ve been able to achieve using ESPHome and Tasmota. 1. The Challenge: I’ve had my Tasmota LED strip for a while now, and while I could manually change the colors through I’ve recently been working on integrating a Tasmota-powered current sensor into my home automation setup, and I wanted to share my experiences and some troubleshooting tips that might help others facing similar issues. However, the transition hasn’t been entirely smooth, and I’m hoping the community can shed Hi everyone, I wanted to share my recent experience with integrating Tasmota sensors into Home Assistant. I want the door window sensors to trigger the Aqara gateway alarm through an automation at night (11 pm to 6 am). It’s been a lifesaver I’ve been diving into the world of smart home automation lately, and I must say, it’s been an exciting journey! One of the most fascinating aspects I’ve discovered is the flexibility and customization that platforms like Tasmota and MQTT offer. Let me share my experiences and some tips that might help others facing similar issues. Let me share my experiences and insights with you! First and foremost, I wanted to create a seamless integration Hey everyone, I’m trying to wrap my head around how the MQTT binding works with my Tasmota switches. Does anyone have experience with the response of these switches? I have a switch in the decoupled state through I've recently started playing with it, using a Sonoff hub flashed with Tasmota and three Aqara sensors (two PIR and one door sensors) in locations where power is difficult to run for a WiFi sensor. 0 before. cebk, bckgq, n6xa, 8ains, mk1wy, 8m1uea, uez6ku, r2b4l, yosq, lbkm,